Porcupine
Printed From: Pixel Joint
Category: Pixel Art
Forum Name: WIP (Work In Progress)
Forum Discription: Get crits and comments on your pixel WIPs and other art too!
URL: https://pixeljoint.com/forum/forum_posts.asp?TID=4188
Printed Date: 12 September 2025 at 11:34am
Topic: Porcupine
Posted By: marilii
Subject: Porcupine
Date Posted: 03 May 2007 at 11:38am
What can I say. It's a porcupine. Any c+c extremely welcome 
 10 colours at the moment.
|
Replies:
Posted By: M.E.
Date Posted: 03 May 2007 at 12:56pm
|
Hi Marilii, What kind of porcupine is it? The one with stripped colors on his spikes? If so , maybe you could emphasize them a bit. Also, when looking at some google pictures I noticed that the face is fuller than yours. Thicker. Sorry if I don't find the right words. The top seems to be trimmed off as well. Try to make a more unevenly structure like you did at the tail. Good luck! Best regards from M.E. ------------- http://www.kunststukken.nl - KunstStukken.nl M.E. Art |
Posted By: halfDemon
Date Posted: 03 May 2007 at 7:49pm
|
His other hind leg should be visible, and you can definitely lower the color count. ------------- Every pixel counts, even the dead ones. |
Posted By: marilii
Date Posted: 04 May 2007 at 10:22am
|
Thank you both! I made the other hind leg visible, changed the face and tried to emphasize the spikes a bit. I also managed to get the colour count down to 8 (including transparency)  |
Posted By: M.E.
Date Posted: 07 May 2007 at 12:30am
|
Hello Marilii, The top is much better, as well as the face; but I failed to see the emphasize on the spikes. Maybe you can exagerate the darks a little bit. Best regards from M.E. ------------- http://www.kunststukken.nl - KunstStukken.nl M.E. Art |