Print Page | Close Window

[WIP] Custom Jazzmaster

Printed From: Pixel Joint
Category: Pixel Art
Forum Name: WIP (Work In Progress)
Forum Discription: Get crits and comments on your pixel WIPs and other art too!
URL: https://pixeljoint.com/forum/forum_posts.asp?TID=5709
Printed Date: 11 September 2025 at 10:18am


Topic: [WIP] Custom Jazzmaster
Posted By: 5L1V3R
Subject: [WIP] Custom Jazzmaster
Date Posted: 31 December 2007 at 12:43pm
Here is my customized Fender Jazzmaster.  It is my first pixel, so there are definitely some noob mistakes and flaws.  The shading is poor (on the headstock especially), there's no AA, and the components are inaccurate.  I am also trying to add a pearloid effect to the pickguard (see bottom image for those not guitar savvy  ) and make the Jazzmaster tremolo better.  If you can offer any help, please do: 
 



Replies:
Posted By: BlackDragon
Date Posted: 31 December 2007 at 12:46pm

...the first problem being your image host.

We can't se the pixel properly, use photobucket or tinypic instead.



-------------
"A little pain never hurt anyone." - Blueberry_Pie


Posted By: jalonso
Date Posted: 31 December 2007 at 12:49pm
Stand by for technical difficulties.

-------------
http://www.pixeljoint.com/forum/forum_posts.asp?TID=9378&FID=6&PR=3 - PJs FAQ <•> http://www.pixeljoint.com/forum/forum_topics.asp?FID=6 - Sticky Reads


Posted By: 5L1V3R
Date Posted: 31 December 2007 at 12:51pm
oops here i'll try again


Posted By: BlackDragon
Date Posted: 31 December 2007 at 12:56pm
Before coloring always make sure your lineart is proportional and free of jaggies, it helps in the end.
Also I think you should have made this 50% smaller in the first place.


-------------
"A little pain never hurt anyone." - Blueberry_Pie


Posted By: 5L1V3R
Date Posted: 01 January 2008 at 9:31pm
ive started to lose interest in this project, adding the pearloid is too stressful



Print Page | Close Window