my first iso
Printed From: Pixel Joint
Category: Pixel Art
Forum Name: WIP (Work In Progress)
Forum Discription: Get crits and comments on your pixel WIPs and other art too!
URL: https://pixeljoint.com/forum/forum_posts.asp?TID=1909
Printed Date: 13 June 2026 at 12:19pm
Topic: my first iso
Posted By: kendi64
Subject: my first iso
Date Posted: 30 March 2006 at 6:09am
|
Some of you who play mmorpg may recognize this right off, for those who don't I have linked reference screenshots below (sorry there are so few of them, they are hard to find). I wanted to do something else, but I thought it was better to start small then work my way up. This is the temple of life area in north qeynos in Everquest(1). I tried to make it as accurate as possible with the few screenshots I have and the map and I don't know if I can entirely get it 100% accurate. I have not added the NPCs, I haven't made sprits before and I'm afraid to ruin what I have already done heh. The light source is from the top left corner and have tried to place the edging colors properly, but not entirely sure if I have done it correctly. I don't know what I should change/add to this to make it better. I do know there is a brick like walkway on the bottom right side where the grass is, but I don't have good enough screenshots to tell me where it should be, so that will be something I'll add in later. Any comments/CC would be helpful as this is my first and still learning Thank you :) map (top right corner where says temple of life): http://www.interealms.com/ranger/maps/qeynos.jpg - http://www.interealms.com/ranger/maps/qeynos.jpg
|
Replies:
Posted By: Dra_chan
Date Posted: 30 March 2006 at 10:49am
|
that lightbeam thingy should change the tone when it reaches the underwater. Nice work in your first iso! |
Posted By: kendi64
Date Posted: 30 March 2006 at 11:40am
| Well actually its supposed to reach the top of the surface and that's it, I think I'll need to shorten it then. The whole thing was hard to place heh. Thank you |
Posted By: Shark
Date Posted: 30 March 2006 at 11:49am
|
the walls are very well done IMO, but i dont think the rest of it is up
to the same standard. ------------- Snark, we love yuu. |
Posted By: Dra_chan
Date Posted: 30 March 2006 at 11:52am
|
Originally posted by kendi64 Well actually its supposed to reach the top of the surface and that's it, I think I'll need to shorten it then. The whole thing was hard to place heh. Thank you Oh I see, then yeah, make it shorter, in the same height of the surface of the other column  |