Pixel Joint Forum: Mech, Process

Message

   Hi guys.

I would like to share the progress of this pixel art I made. 

After a lot of small studies I decided to make something more detailed. I'm not an expert on this so if you have a tip or a comment I'll appreciate.

I used the Graphics Gale and worked with multiple layers. 

Here is the final version

Reference I used:

http://milonogiannis.tumblr.com/post/79856604431/mondaybot

=]

Edited by danx - 11 March 2015 at 4:00pm

Author	Message
danx Seaman Joined: 03 February 2015 Online Status: Offline Posts: 1	Topic: Mech, Process Posted: 11 March 2015 at 4:00pm
	Hi guys. I would like to share the progress of this pixel art I made. After a lot of small studies I decided to make something more detailed. I'm not an expert on this so if you have a tip or a comment I'll appreciate. I used the Graphics Gale and worked with multiple layers. Here is the final version Reference I used: http://milonogiannis.tumblr.com/post/79856604431/mondaybot =] Edited by danx - 11 March 2015 at 4:00pm
	IP Logged

RBL Midshipman Joined: 07 February 2018 Online Status: Offline Posts: 55	Posted: 16 March 2015 at 2:54pm
	I really love the process on gi. You could clean the final step by removing lost pixels, for example at the chest plate edge. Consider some AA too.
	IP Logged

WIP (Work In Progress)
Pixel Joint Forum : Pixel Art : WIP (Work In Progress)