creating isomtric lampost
Printed From: Pixel Joint
Category: The Lounge
Forum Name: Resources and Support
Forum Discription: Help your fellow pixel artists out with links to good tutorials, other forums, software, fonts, etc. Bugs and support issues should go here as well.
URL: https://pixeljoint.com/forum/forum_posts.asp?TID=14668
Printed Date: 13 September 2025 at 10:58pm
Topic: creating isomtric lampost
Posted By: hansolo
Subject: creating isomtric lampost
Date Posted: 04 July 2012 at 2:41pm
|
hi im having difficulty on the curve of lampost and keeping the lines correct . i have the isomtric square correct on the lid above the light of the lampost correct. However its the curved part the spine of the lampost which i am finding difficult. http://fav.me/d563z3w |
Replies:
Posted By: yrizoud
Date Posted: 04 July 2012 at 4:35pm
|
In step 2 your left slope "breaks" from the line . The curve should start from a tangeant instead. (well, if the curve was not intended to have a break, anyway) Step 3 has a bigger issue: the left side ends on top instead of staying on the side. 
|
Posted By: hansolo
Date Posted: 05 July 2012 at 2:40pm
|
cheers commander you right. Ive changed my method now . I created a line by creating isometric grid on the side . I applied illustrator round corner to a stoke .Which does seem to be correct now How ever i would like to know how to manually draw this tangent curve for the lamp post on the side grid.. if any can rather thann using my method thanks http://fav.me/d568fdt |